It Comes with 3pin JST-SM connectors and separated power/ground wires on both ends.
Each LED can be cut off without damaging the rest strip.
Each LED can be cut off without damaging the rest strip.
RGBW = RGB + Cold White (6000-7000k),RGBWW= RGB + Warm White (2700-3200k),RGBNW= RGB + Natural White (4000-4500k),RGBW = RGB + Cold White (6000-7000k),WWA = White + Warm White + Amber
LED source :5050SMD RGBW/WW/WWA built-in SK6812 chip
SK6812RGBW/RGBWW/RGBNW is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 5050 LED chip. Each lighting element is a pixel,
and the intensities of thepixels are contained within the intelligent digital interface input.
The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels.
The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
The data protocol being used is unipolar NRZ communication mode.
The 32-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification
circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission
only limited by signal transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.
Accessory :
Productoon process :
Application:
and the intensities of thepixels are contained within the intelligent digital interface input.
The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels.
The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
The data protocol being used is unipolar NRZ communication mode.
The 32-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification
circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission
only limited by signal transmission speed.
The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.
Accessory :
Productoon process :
Application:
The waterproof material is made of soft sicilon, and the strip light is IP65. There are 300pcs SMD 5050 Digital LED strip lights, which can get the changing modes like waterflow,
chasing, gradually changing, flashing, diffusing and other kinds of colorful performance under the control of offline controller with SD card.
chasing, gradually changing, flashing, diffusing and other kinds of colorful performance under the control of offline controller with SD card.
It is ideal for advertising signs, indoor decration and other kinds of edge lighting, etc. Many pcs of such strip lights can be connected together and the waterproof connectors are
used for connection parts, which makes sure the waterproof function of the whole unit.
used for connection parts, which makes sure the waterproof function of the whole unit.
