1) WS2815 12V smart RGB addressable pixel led Strip is powered by a 12V power supply and is controlled by a single data line from a suitable controller

2) 3-pin JST connector included: Red:VCC, Yellow: GND, Green: DATA

3) The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry

4) Strip can be cut between every LED to create custom lengths

5) Do not bend strip sharply

6) Longer runs should be powered from both ends to reduce voltage drop

7) 30leds/m, 60leds/m available, one roll max Length can be 10M